Rixson 27-3/4-Complete 3/4" Offset Floor Closer

SKU: 27-3/4-Complete - Includes All Components or Customize Below Considered the standard for heavy duty offset floor closers, Rixson's 27 series satisfies most offset-hung requirements with a positive stop and numerous options. The 3/4" offset is standard. A closer package can include everything that you need for a new installation.

Change or Remove Components (optional)

Instructions & Templates for this Kit

Body

Offset Floor Closer Body (27)

Product Overview

Single Acting
Handed
For exterior or interior doors
For door weight to 450 lbs.
For door Width up to 4'0""

Door size & weight guidelines are determined using the appropriate number of intermediate pivots.

Technical Specifications

Built-in positive dead stop prevents door from swinging beyond the desired opening degree (select 85, 90 or 105°)
Separate and independent valves for closing speed, latch speed and backcheck
Available non hold-open (NHO) or selective hold open (SHO) at same degree as dead stop
Uses cycolac cement case
Vertical door adjustment
Intermediate pivot required
Doors up to 90" in height should use one intermediate pivot. Each additional 30" warrants another intermediate pivot

Configurations including DAPH, CWF, ELS, SC and PH can be found in our extensive inventory. Also available as a special order with 95° opening swing, CWF, DA, ELS, SC or PH options as required. Contact us directly to arrange for your special order.

Product Overview

Cycolac cement case for use with 25/26/27/28 Series closers.

Cement case includes closer mounting screws.

Technical Specifications

Case size: 11-1/8" L x 5-7/8" W x 4-1/16" H

Templating and instructional information can be found with the floor closer body section.

None [Subtract $41.00]

Floor Plate Package

27/127 S Floor Plate (274750)

Product Overview

Floor plate package for 27S & 127S Series offset floor closers.

Package includes mounting screws.

Technical Specifications

Plate size: 9-7/8" x 6-1/8"

Available as a special order with other finishes. Contact us directly to arrange for your special order.

None [Subtract $45.00]

Arm Package

3/4" Offset Arm Package (252050)

Product Overview

3/4" offset arm package for standard doors.

Handed
Includes arm cap and mounting screws.

Technical Specifications

Standard arm package for 20, 25 & 27 Series floor closers.

Available as a special order with other finishes. Contact us directly to arrange for your special order.

None [Subtract $48.00]

Optional Intermediate Pivot

Offset Full Mortise Intermediate Pivot (M19)

Product Overview

3/4" offset full mortise intermediate pivot

Handed

Technical Specifications

Not load-bearing
Maintains door alignment
Non-ferrous base metal
3/4" offset
Furnished with wood and machine screws

Available in all standard architectural finishes. Contact us directly to order a finish not shown.

Product Overview

For 3/4" offset standard duty applications

Full mortise
Non handed

Technical Specifications

Standard top pivot for most offset pivot sets and floor closers

Oil-impregnated sintered bronze bearing
Non-ferrous base metal
3/4"(19mm) offset (measured from centerline of pivot to face of door)
Furnished with wood and machine screws

Available in all standard architectural finishes. Contact us directly to order a finish not shown.