Rixson 28-Complete Center Hung Floor Closer

SKU: 28-Complete - Includes All Components or Customize Below Considered the standard for heavy duty center-hung floor closers, Rixson's 28 series satisfies most center-hung requirements with a positive stop and numerous options. The adjustable arm allows you to position the door to close against the stop. A closer package can include everything that you need for a new installation.

Change or Remove Components (optional)

Instructions & Templates for this Kit

Body

Center Hung Floor Closer Body (28)

Product Overview

Single Acting
Handed
For exterior or enterior doors
For door weights to 350 lbs.
For door sizes up to 4' 0" x 8' 6"

Technical Specifications

Built-in positive dead stop prevents door from swinging beyond the desired opening degree (select 90° or 105°)
Separate and independent valves for closing speed, latch speed and backcheck
Available as non hold-open (NHO) or selective hold open (SHO) at same degree as dead stop
Uses cycolac cement case
Arm centering adjustment
Not allowed for fire rated doors
Frame or applied stop required, such as #60131

Configurations including DAPH, CWF, ELS, SC and PH can be found in our extensive inventory. Also available as a special order with 85° or 95° opening swing, CWF, DA, ELS, SC or PH options as required. Contact us directly to arrange for your special order.

Product Overview

Cycolac cement case for use with 25/26/27/28 Series closers.

Cement case includes closer mounting screws.

Technical Specifications

Case size: 11-1/8" L x 5-7/8" W x 4-1/16" H

Templating and instructional information can be found with the floor closer body section.

None [Subtract $41.00]

Floor Plate

28/328 S Floor Plate (284720)

Product Overview

Floor plate package for 28S & 328S Series center-hung floor closers.

Package includes mounting screws.

Technical Specifications

Plate size: 11-7/8" x 6-1/8"

Available as a special order with other finishes. Contact us directly to arrange for your special order.

None [Subtract $47.00]

Arm Package

Center Hung Arm Package (282026)

Product Overview

Standard center hung arm package for 21 & 28 Series Closers.
Includes mounting & alignment screws, and shims/shim stud assembly.

Finish applies to adjustment screws and washers.

Technical Specifications

Available as a special order with other finishes. Contact us directly to arrange for your special order.

None [Subtract $62.00]

Top Pivot

Earthquake tolerant top pivot (345)

Product Overview

For Center Hung Applications

Fully Concealed
Center Hung
Non-handed
Earthquake Tolerant

Technical Specifications

Ideal for locations where there is a fear of dramatic building settling.

Long pivot pin engages in top of door 1-3/4"
Can be used with any center hung bottom pivot.
Walking beam-type pivot–1/2" diameter pivot pin
Oil-impregnated sintered bronze bearing
Completely concealed when door is closed
Furnished with wood and machine screws
For doors over 8' 6" in height

Available in all standard architectural finishes. Contact us directly to order a finish not shown.

Product Overview

For center hung applications

Fully Concealed
Center Hung
Non-handed
For standard weight doors
Furnished standard with most pivot sets and floor closers

Technical Specifications

Standard top pivot for Models 370 and 117-3/4 pivot sets. Also used with 28, 30, 40 and 50 Series floor closers
Walking beam-type pivot–1/2" diameter pivot pin with 3/4" engagement
Oil-impregnated sintered bronze bearing
Completely concealed when door is closed
Furnished with wood and machine screws

Available in all standard architectural finishes. Contact us directly to order a finish not shown.

Product Overview

Wood door shim/plate package for use with center hung floor closer arms.
Used with W28, W30, W40 and W50 floor closers.
Includes mounting screws.

Technical Specifications

There are no technical specifications for this product.

None [Subtract $37.00]