Rixson 502X-Complete Shallow Double Acting Floor Closer

SKU: 502X-Complete - Includes All Components or Customize Below RixsonÕs shallow depth floor closers are recommended for low to medium traffic interior doors where traditional floor closer depth is too great for slab construction. The Rixson 502 series center hung double acting shallow floor closers are for interior doors weighting up to 250 lbs. Complete closer packages can include everything that you need for a new installation

Change or Remove Components (optional)

Instructions & Templates for this Kit

Body

Shallow Depth Double Acting Floor Closer Body (502X)

Product Overview

Double Acting
Non-handed
For interior doors
Door weight to 250 lbs.
Door Sizes up to 4'0" x 8'0"

Technical Specifications

Available non hold-open or 90° or 105° hold open
Available in spring sizes 3 through 5
Will swing as far as frame trim will permit
Backcheck option normally supplied
Uses Cycolac cement case
Not allowed for use on labeled fire doors and frames

Available as a special order without BC or with DA, ELS, SC or PH options. Contact us directly to arrange for your special order.

Product Overview

Cycolac cement case for use with 50/51/52 Series shallow floor closers.

Cement case includes closer mounting hardware.

Technical Specifications

Case size: 19-1/8" L x 4-3/8" W x 2" H

Templating and instructional information can be found with the floor closer body section.

None [Subtract $46.00]

Floor Plate

50 Series Floor Plate (4000600XXE)

Product Overview

Floor plate package for 50 Series floor closers.

Package includes mounting screws.

Technical Specifications

Plate size: 19-1/4" x 4-1/2"

Available as a special order with other finishes. Contact us directly to arrange for your special order.

None [Subtract $47.00]

Arm Package

Center Hung Arm Package (282026)

Product Overview

Standard center hung arm package for 21 & 28 Series Closers.
Includes mounting & alignment screws, and shims/shim stud assembly.

Finish applies to adjustment screws and washers.

Technical Specifications

Available as a special order with other finishes. Contact us directly to arrange for your special order.

None [Subtract $62.00]

Top Pivot

Earthquake tolerant top pivot (345)

Product Overview

For Center Hung Applications

Fully Concealed
Center Hung
Non-handed
Earthquake Tolerant

Technical Specifications

Ideal for locations where there is a fear of dramatic building settling.

Long pivot pin engages in top of door 1-3/4"
Can be used with any center hung bottom pivot.
Walking beam-type pivot–1/2" diameter pivot pin
Oil-impregnated sintered bronze bearing
Completely concealed when door is closed
Furnished with wood and machine screws
For doors over 8' 6" in height

Available in all standard architectural finishes. Contact us directly to order a finish not shown.

Product Overview

For center hung applications

Fully Concealed
Center Hung
Non-handed
For standard weight doors
Furnished standard with most pivot sets and floor closers

Technical Specifications

Standard top pivot for Models 370 and 117-3/4 pivot sets. Also used with 28, 30, 40 and 50 Series floor closers
Walking beam-type pivot–1/2" diameter pivot pin with 3/4" engagement
Oil-impregnated sintered bronze bearing
Completely concealed when door is closed
Furnished with wood and machine screws

Available in all standard architectural finishes. Contact us directly to order a finish not shown.

Product Overview

Wood door shim/plate package for use with center hung floor closer arms.
Used with W28, W30, W40 and W50 floor closers.
Includes mounting screws.

Technical Specifications

There are no technical specifications for this product.

None [Subtract $37.00]