Rixson H28-587-Complete Heavy Duty Center Hung Closer

SKU: H28-587-Complete - Includes All Components or Customize Below The Rixson H28 series is the smart choice for controlling extremely heavy center-hung doors. H28's are ideal for use with thick, bronze or stone clad doors, and work well on interior or exterior applications. The side-load arm is used on those applications that require access to the spindle from the face of the door. A closer package can include everything that you need for a new installation.

Change or Remove Components (optional)

Instructions & Templates for this Kit

Body

Heavy Duty Center Hung Floor Closer Body (H28)

Product Overview

Single Acting
Handed
For exterior or interior doors
For Extra Heavy Doors
For door weight to 1000 lbs.
For door sizes up to 4' 0" x 8' 6"

Technical Specifications

For thick, heavy doors
Thrust bearing for greater load capacity
Built-in positive dead stop at 90° prevents door from swinging beyond the opening degree
Separate and independent valves for closing speed, latch speed and backcheck
Available non hold-open (NHO) or selective hold open (SHO) at same degree as dead stop
Uses cast iron cement case
Body includes 41204 thrust bearing package
Not allowed for fire rated doors
Frame or applied stop required, such as #60131

Available as a special order with 85°, 95° or 105° opening swing, CWF, DA, ELS, SC or PH options. Contact us directly to arrange for your special order.

Product Overview

Cast iron cement case for use with L27/H27/H28 Series closers.

Cement case includes closer mounting screws.

Also recommended for environmental applications where cycolac cement cases are inappropriate for 25/26/27/28 series closers.

Technical Specifications

Case size: 11-1/8" L x 5-7/8" W x 4-1/16" H

Templating and instructional information can be found with the floor closer body section.

None [Subtract $86.00]

Floor Plate

28/328 S Floor Plate (284720)

Product Overview

Floor plate package for 28S & 328S Series center-hung floor closers.

Package includes mounting screws.

Technical Specifications

Plate size: 11-7/8" x 6-1/8"

Available as a special order with other finishes. Contact us directly to arrange for your special order.

None [Subtract $47.00]

Arm Package

Side Load Arm Package (262587)

Product Overview

H28/H40 center hung arm package.

For 1-3/4" doors
Side load
Includes mounting screws.

Technical Specifications

There are no technical specifications for this product.

None [Subtract $270.00]

Top Pivot

Earthquake tolerant heavy duty top pivot (H345)

Product Overview

For Center Hung Applications

Fully Concealed
Center Hung
Non-handed
Earthquake Tolerant
For taller doors

Technical Specifications

Ideal for locations where there is a fear of dramatic building settling

Long pivot pin engages in top of door 1-3/4"
Can be used with any center hung bottom pivot
Walking beam-type pivot–3/4"(13mm) diameter pivot pin
Heavy-duty needle bearing
Completely concealed when door is closed
Furnished with wood and machine screws
For doors over 8'6" in height
Can be used with heavy-duty pivots & closers

Available in all standard architectural finishes. Contact us directly to order a finish not shown.

Product Overview

For Center hung applications

Fully Concealed
Center Hung
Non-handed
Walking Beam type pivot
Furnished standard with heavy duty floor closers and pivots

Technical Specifications

Standard top pivot for Model H117-3/4 pivot set. Also used for H28 and H40 Series floor closers
Walking beam-type pivot
11/16" diameter pivot pin with 3/4" engagement
Heavy-duty needle bearing
Completely concealed when door is closed
Furnished with wood and machine screws

Available in all standard architectural finishes. Contact us directly to order a finish not shown.

Product Overview

Spindle shoulder collar for heavy duty arm packages.

Required with the use of the 41204-PKG thrust bearing.

Typical with H28 and L27 closers.

Technical Specifications

Available as a special order with other finishes. Contact us directly to arrange for your special order.

None [Subtract $46.00]