Rixson H40-587-Complete Heavy Weight Double Acting Floor Closer

SKU: H40-587-Complete - Includes All Components or Customize Below When a floor closer that permits thick or heavy interior doors to swing in both directions is needed the Rixson H40-587 heavy duty series double acting floor close fills the bill. For interior doors up to 1000 LBS.and 2" or thicker. With adjustable closing speed valves for each direction of door swing. Complete closer packages can include everything that you need for a new installation

Change or Remove Components (optional)

Instructions & Templates for this Kit

Body

Heavy Duty Double Acting Center Hung Floor Closer Body (H40)

Product Overview

Double Acting
Non-handed
For interior doors
For door weights up to 1000 lbs.
Door door sizes up to 4' 0" x 8' 6"

Technical Specifications

For thick, heavy doors
Arm selection determines door thickness - either 1-3/4" or 2"
Thrust bearing for greater load capacity
Adjustable closing speed valves for each direction of door swing
Mechanism returns door to center
Maximum door opening 103°
Overhead stop recommended for exterior or high traffic doors
Uses steel cement case
Body includes 41204 thrust bearing package
The arm used on this closer does not allow door centering adjustment. Not recommended for pairs of doors
Not allowed for fire rated doors
For single acting applications - #60131 applied stop required

Available as a special order with CWF, ELS, SC or PH options. Contact us directly to arrange for your special order.

Product Overview

Steel cement case for 40/H40 series floor closers.

Includes closer mounting screws.

Technical Specifications

Case Size 17" L x 6-1/16" W x 4-1/16" H

Templating information can be found with the floor closer body for this series.

None [Subtract $57.00]

Floor Plate

40 Series Floor Plate (404020)

Product Overview

Floor plate package for 40 & H40 series center hung floor closers.

Package includes two piece floor plate and mounting screws.

Technical Specifications

Plate size: 17-1/4" x 6-1/8"
Size includes both plates.

Available as a special order with other finishes. Contact us directly to arrange for your special order.

None [Subtract $59.00]

Arm Package

Side Load Arm Package (262587)

Product Overview

H28/H40 center hung arm package.

For 1-3/4" doors
Side load
Includes mounting screws.

Technical Specifications

There are no technical specifications for this product.

None [Subtract $270.00]

Top Pivot

Earthquake tolerant heavy duty top pivot (H345)

Product Overview

For Center Hung Applications

Fully Concealed
Center Hung
Non-handed
Earthquake Tolerant
For taller doors

Technical Specifications

Ideal for locations where there is a fear of dramatic building settling

Long pivot pin engages in top of door 1-3/4"
Can be used with any center hung bottom pivot
Walking beam-type pivot–3/4"(13mm) diameter pivot pin
Heavy-duty needle bearing
Completely concealed when door is closed
Furnished with wood and machine screws
For doors over 8'6" in height
Can be used with heavy-duty pivots & closers

Available in all standard architectural finishes. Contact us directly to order a finish not shown.

Product Overview

For Center hung applications

Fully Concealed
Center Hung
Non-handed
Walking Beam type pivot
Furnished standard with heavy duty floor closers and pivots

Technical Specifications

Standard top pivot for Model H117-3/4 pivot set. Also used for H28 and H40 Series floor closers
Walking beam-type pivot
11/16" diameter pivot pin with 3/4" engagement
Heavy-duty needle bearing
Completely concealed when door is closed
Furnished with wood and machine screws

Available in all standard architectural finishes. Contact us directly to order a finish not shown.

Product Overview

Spindle shoulder collar for heavy duty arm packages.

Required with the use of the 41204-PKG thrust bearing.

Typical with H28 and L27 closers.

Technical Specifications

Available as a special order with other finishes. Contact us directly to arrange for your special order.

None [Subtract $46.00]