Qualified Hardware logo Paypal
1-866-749-7661 Contractor Hotline: 1-866-622-0224
1-866-749-7661 Contractor Hotline: 1-866-622-0224

Von Duprin 9927EO-26

Special Order Surface Mounted Vertical Rod Device

SKU: 9927EO-26

Price: $1,242.00

Special Order non-stock item Requires 4 week lead time

Choose Options Below

  • Mounting holes are spaced 3/4" vertically x 9-1/16" horizontally.
  • 2-7/8" projection.
  • Exceeds 10 million cycles (verified by UL).
  • Barrier Free- The 1601BF door closers are designed to comply with requirements of the Americans with Disabilities Act (A.D.A.) and ANSI standard A117.1.Reduced opening force 5 lb or less on interior doors, 8.5 lb or less on exterior doors. Door closers installed in openings required to meet the requirements of the Americans with Disabilities Act when adjusted to meet those requirements, may not provide adequate closing power to dependably close and latch the door.
  • Non-handed, with few exceptions all series 1600BC and series 1601 door closers are non handed and can be installed on either right- or left- hand swing doors.
  • Aluminum alloy housing,closer bodies are constructed of a special aluminum alloy, carefully selected to accommodate interaction with steel
    components and operating conditions.
  • Standard, separate and independent, latch, sweep and backcheck intensity valves.
  • Sweep Speed control value, allows adjustment of door speed from the door's full open position down to approximately 10° from the closed position.
  • Latch Speed control value, allows adjustment of door speed from approximately 10° down to the door’s fully closed position.
  • Adjustable Backcheck Cushion, provides control of the door in the opening cycle, beginning at approximately 75° of door opening. It slows/cushions the door opening, when the door is forcibly opened beyond its pre-adjusted opening speed limits.
  • Closer Fluid, NorGlide® door closer fluid is a specially formulated hydraulic fluid that contains lubricity and anti oxidation agents that provide optimum performance and efficiency. This fluid allows the door closer to perform in temperatures
    ranging from extremely high to as low as -40° F.
  • Tri-Style® packaging -1600BC/1601(BF) closers come with screws, brackets & soffit plate to allow for regular, top jamb, & parallel arm installations.
  • All standard arm applications allow doors to swing 180 degrees, conditions permitting.
  • ANSI/BHMA A156.4, Grade 1 certified.
  • UL10C compliant for positive pressure.
  • A.D.A. compliant (1601BF).
  • UL listed for labeled fire doors with non-hold open arms.
     Available as a special order with other finishes.Contact us directly to arrange for your special order.
See more product information below

Because this is not a stock item we must order it specifically for you and we will be unable to accept a return unless the item is defective as determined by the factory it was bought from.

  • Special Order
  • FREE Shipping

Have a question about this product?

Price: $1,242.00

Choose Options

Start selecting options

Use the menu on the right to select available options.
After all options have been chosen, you can add to cart.

Choose Rail Size:


Special order item with 4 week lead time.
  • Exit Only function-exterior lock not included.
  • Polished chrome finish.
  • Vertical rods-standard rods accommodate 7’ door.
  • Device functions- device ships EO/DT/NL/TP or L,field selectable.
  • For all types of single or double doors.

Available Options: Choose Options Above

  • Rail Size:

    • 3 FT
    • 4 FT
  • Strikes Top - 299 – Dull black finish, Bottom – 248L4 & 304L - unfinished
  • Hex key dogging standard.
  • Latch Bolt -  deadlocking anti-friction top & bottom bolt, 5/8" throw.
  • Covers stock hollow metal doors with 86 or 161 cutouts.
  • Non-handed except when the following device options are used:
    SD (Special Dogging), or SS (Signal Switch).
  • UL listed for Panic Exit Hardware.
  • Devices are ANSI A156.3 – 2001 Grade 1.
  • Door thickness- 1-3/4" and 2-1/4" with standard centerlines.
  • Device Centerline from Finished Floor 39-5/8".
  • Top rod length is 34-15/16". Bottom rod length is 31-1/4".
  • Door Undercut 1/4".
  • Center Case Dimensions 8" x 2-3/4" x 2-3/8".
  • Top & Bottom Latch Case 4-1/2" x 2-1/8" x 1-1/2".
  • Projection -Pushbar Neutral, 3-13/16" Pushbar Depressed, 3-1/16".



Instructions & Templates

Click on the links below to download helpful instructions & templates for this product

Special Order Surface Mounted Vertical Rod Device

Scroll for More Product Information