Rim Exit Device with Dummy Pull Trim

Product Overview

• Rim exit device with 990DT dummy trm, pull when dogged.
• For all types of single and double doors with mullion
• Covers stock hollow metal doors with 86 or 161 cutouts on single doors
• Device Lengths 3’- 2’4" to 3’door size, 4’ 2’10" to 4’door size
• Strike- 299 – Dull Black.
• Dogging Feature- Hex key dogging standard.
• Latch Bolt-Deadlocking 3/4“ throw

Rim Exit Device with Dummy Pull Trim

Technical Specifications

• Non-handed except when the following device options are used:
  SD (Special Dogging), -2 (Double Cylinder) or SS (Signal Switch)
• UL listed for Panic Exit
• ANSI A156.3 – 2001 Grade 1.
• Available with EL (Electric Latch Retraction) option. The EL feature allows for the remote unlatching of exit devices.The EL option does not include the power transfer from door to frame, the power supply, or the control operator . Available in 3" size only
• Device Centerline from Finished Floor – 39-13/16”, 39-11/16” with mullion
• Center Case Dimensions- 8"x 2-3/4”x 2-3/8"
• Mechanism Case Dimensions- 2-1/4" x 2-1/4"
• Projection Pushbar Neutral – 3-13/16", Pushbar Depressed – 3-1/16"
  Available as a special order in other finishes and with RX,LX, or SS swithches. Call us directly to arrange your special order.

Rim Exit Device with Dummy Pull Trim

Videos

Rim Exit Device with Dummy Pull Trim

You May Also Need...