Order in the next 21 hours 8 minutes to ship tomorrow!

Overhead Holders

About this Category

Protect your door and frame from abuse caused by everyday use with an overhead holder/stop. It won’t be in your way or affect the aesthetics of your room. Browse through our selection to find the perfect one for your application.

Jump to a brand:

Rixson

view

Rixson - 1-Series Heavy Duty Concealed Mount Holder/Stop

Multiple Options and Finishes

Starting at: $290.00

This Rixson 1-Series heavy-duty, concealed mount, holder/stop is recommended for exterior and interior doors that have a high traffic rate and/or are heavily abused. These overhead holders are used to protect door assemblies by cutting down the wear and tear of frequent use, protecting closing mechanisms from wind gusts, abuse and vandalism.

Series: 1 series
Usage: Heavy Duty

view

Rixson Adjustable Standard Duty Concealed Holder/Stop Overhead Holders

Rixson - 2-Series Adjustable Standard Duty Concealed Holder/Stop

Starting at: $141.00

This Rixson 2-Series is an adjustable standard duty concealed holder/stop designed for exterior and interior doors that have moderate door traffic and medium weight. These holders are great for reducing the wear and tear of your doors. The door opening degrees on the 2-series can be adjusted to suit the current needs of the doorway.

Series: 2
Usage: Standard Duty

view

Rixson - 6-336 Concealed Mount Low profile Stop for Aluminum Storefront Doors

Starting at: $391.00

This Rixson 6-336 is a concealed mount, low profile stop used in aluminum door webbing on storefront doors. This model is for doors that are hung with 3/4" offset-hung pivots or butt hinges that measure between 33-1/16" - 38" wide. Should be used on doors that are of medium weight and moderate traffic.

Series: 6 Series

view

Rixson - 6-436 Concealed Mount Low profile Stop for Aluminum Storefront Doors

Starting at: $391.00

The Rixson 6 series of standard duty concealed mount overhead stops and holders is designed for installation in aluminum door webbing. Overhead stops and holders are used to protect door assemblies. They cut down the wear and tear of frequency, closing mechanisms, wind gusts, abuse and vandalism.

Series: 6 Series
Usage: Standard Duty

view

Rixson Heavy Duty Surface Mount Holder/Stop Overhead Holders

Rixson - 9-Series Heavy Duty Surface Mount Holder/Stop

Multiple Options and Finishes

Starting at: $377.00

This Rixson 9-Series heavy duty, surface mount, overhead holder/stops are great to use as protection for your door assemblies against wear and tear. This series is for single acting doors and will allow the door to swing up to 110 degrees.

Series: 9-Series
Usage: Heavy Duty

view

Rixson Standard Duty Surface Mount Holder/Stop Overhead Holders

Rixson - 10-Series Standard Duty Surface Mount Holder/Stop

Multiple Options and Finishes

Starting at: $141.00

This Rixson 10-Series Checkmate, is an overhead holder/ stop family that can be used on medium weight doors with moderate traffic. We offer models with a hold-open or stop for various door sizes hung with offset pivots, butts or center-hung pivots.

Series: 10 Series
Usage: Standard Duty

view

Rixson Electromechanical Hold Open Overhead Holders

Rixson - 99-Series Electromechanical Hold Open

Multiple Options and Finishes

Starting at: $516.00

Rixson's Checkmate 99 series electromagnetic holder is just what is required for doors that need to be held open but already have perfectly good door closers! The 99 Checkmate non-detectored as part of an established building alarm system. The Checkmate 99 can be used with any make or model of door closers (except overhead concealed). Even floor closer installations lend themselves to this product.

Series: 99
Usage: Standard Duty

view

Rixson 10 Series Flush Mounting Angle Jamb Bracket Overhead Holders

Rixson - 5258 10 Series Flush Mounting Angle Jamb Bracket

Starting at: $54.00

This Rixson 5258 angle jamb bracket is used with the 10-series overhead holders/stops that are mounted on the push side of the door.

Glynn-Johnson

view

Glynn-Johnson - 104S-US32D Concealed Heavy-Duty Overhead Stop

Starting at: $285.00

Glynn-Johnson 104S Heavy Duty Concealed overhead stops are are designed for heavy-duty applications, 100 series models will provide long-lasting protection to doors, frames, hinges, related hardware and surrounding walls or obstructions.

Series: 100,104
Usage: Heavy Duty

view

Glynn-Johnson Medium Duty Overhead Holder/ Friction Stop Overhead Holders

Glynn-Johnson - 453F Medium Duty Overhead Holder/ Friction Stop

Starting at: $86.00

Glynn-Johnson 450 Series stops & holders provide reliable and versatile surface-mounted overhead door control for all medium to light-duty applications.

Series: 453F

view

Glynn-Johnson Heavy Duty Overhead Hold-Open/Stop Overhead Holders

Glynn-Johnson - 903H Heavy Duty Overhead Hold-Open/Stop

Starting at: $293.00

Glynn-Johnson 90 Series stops & holders provide reliable and versatile surface-mounted overhead door control for all heavy-duty applications.

Series: 903H
Usage: Heavy Duty

view

Glynn-Johnson Heavy Duty Overhead Stop Only Overhead Holders

Glynn-Johnson - 904S Heavy Duty Overhead Stop Only

Starting at: $293.00

Glynn-Johnson 90 Series stops & holders provide reliable and versatile surface-mounted overhead door control for all heavy-duty applications.

Series: 904S
Usage: Heavy Duty

view

Glynn-Johnson Medium Duty Overhead Stop Overhead Holders

Glynn-Johnson - 454S-32D Medium Duty Overhead Stop

Starting at: $100.00

Glynn-Johnson 450 Series stops provide reliable and versatile surface-mounted overhead door control for all medium to light-duty applications.

Series: 450

More About Overhead Holders

Overhead holders and stops are used to protect a door, frame and their surroundings from damage caused by the uncontrolled swinging and slamming of a door. An overhead holder/stop will control the door by engaging it at a specific degree point thereby preventing it from opening and closing forcefully. By controlling the door’s swing, the expected lifespan of your door and frame will greatly increase.

Overhead holders and stops take the place of floor stops which can be dangerous and unsightly. They won’t pose a tripping hazard and will not be noticeable either. Find the holder/stop that is right for your application.

13 items Scroll to see more below