Rixson 51-Complete 3/4" Offset Shallow Floor Closer

SKU: 51-Complete - Includes All Components or Customize Below RixsonÕs shallow depth floor closers are recommended for low to medium traffic interior doors where traditional floor closer depth is too great for slab construction. The Rixson 51 series of 3/4" offset shallow floor closers are for doors weighting up to 250 lbs. Complete closer packages can include everything that you need for a new installation

Change or Remove Components (optional)

Instructions & Templates for this Kit

Body

Shallow Depth Offset Floor Closer Body (510X)

Product Overview

Single Acting
Handed
For interior Doors
Door weight to 250 lbs.
Door Width up to 4'0"

Technical Specifications

Separate and independent valves for closing speed and latch speed
Allows 180° door swing (trim permitting)
Backcheck option normally supplied
Available non hold-open (NHO) or hold open at 90° (requires door to swing approximately 5° beyond hold open point)
Available in spring sizes 3 through 5
Uses Cycolac cement case
Vertical door adjustment
Use of an intermediate pivot recommended: M19 or similar
Doors up to 90" in height should use one intermediate pivot. Each additional 30" warrants another intermediate pivot

Available as a special order without BC or with DA, ELS, SC or PH options and with 105 or 180 degree hold-open. Contact us directly to arrange for your special order.

Product Overview

Cycolac cement case for use with 50/51/52 Series shallow floor closers.

Cement case includes closer mounting hardware.

Technical Specifications

Case size: 19-1/8" L x 4-3/8" W x 2" H

Templating and instructional information can be found with the floor closer body section.

None [Subtract $46.00]

Floor Plate

51 Series Floor Plate (4000500)

Product Overview

Floor plate package for 51 Series offset floor closers.

Package includes mounting screws.

Technical Specifications

Plate size: 19-1/4" x 4-1/2"

Available as a special order with other finishes. Contact us directly to arrange for your special order.

None [Subtract $47.00]

Arm Package

3/4" Offset Arm Package (252050)

Product Overview

3/4" offset arm package for standard doors.

Handed
Includes arm cap and mounting screws.

Technical Specifications

Standard arm package for 20, 25 & 27 Series floor closers.

Available as a special order with other finishes. Contact us directly to arrange for your special order.

None [Subtract $48.00]

Optional Intermediate Pivot

Offset Full Mortise Intermediate Pivot (M19)

Product Overview

3/4" offset full mortise intermediate pivot

Handed

Technical Specifications

Not load-bearing
Maintains door alignment
Non-ferrous base metal
3/4" offset
Furnished with wood and machine screws

Available in all standard architectural finishes. Contact us directly to order a finish not shown.

Product Overview

For 3/4" offset standard duty applications

Full mortise
Non handed

Technical Specifications

Standard top pivot for most offset pivot sets and floor closers

Oil-impregnated sintered bronze bearing
Non-ferrous base metal
3/4"(19mm) offset (measured from centerline of pivot to face of door)
Furnished with wood and machine screws

Available in all standard architectural finishes. Contact us directly to order a finish not shown.