Qualified Hardware logo Call to Speak
to an Expert
1-866-749-7661 Contractor Hotline: 1-866-622-0224

 

 

ASI 3701

ASI 3701 Straight Grab Bar, 1-1/4" Diameter, Stainless Steel, Satin Finish

Quick Product Details

  • (This Product Requires an Additional 2 Days Shipping)
  • Available in multiple lengths
  • Suffix P for peened finish, suffix W for white powder coat, no suffix for satin stainless
  • 18-gauge Type 304 stainless steel, 1-1/4
  • Snap-on flange cover conceals mounting screws
  • Meets ADA, ANSI A117.1, and 2010 ADA Accessibility Standards
  • Tested to support loads in excess of 250 lbs
  • 1-year warranty
Price: $26.00 /each

SKU: 3701

Choose Options Below

(This Product Requires an Additional 2 Days Shipping) The ASI 3701 is a straight horizontal grab bar made from 18-gauge Type 304 stainless steel with a satin finish. It is available in multiple lengths and three finish options: standard satin stainless, peened (suffix P), or white powder coat (suffix W). A snap-on flange cover conceals mounting screws for a clean wall installation, and the bar meets ADA and ANSI A117.1 load requirements.

Because this is not a stock item we must order it specifically for you and we will be unable to accept a return unless the item is defective as determined by the factory it was bought from.

  • Stock Item
  • FREE Same-Day Shipping*When ordered before 2PM ET
  • ×
    Getting shipping methods...

Have a question about this product?

Price: $26.00

Start selecting options

Use the menu on the right to select available options.
After all options have been chosen, you can add to cart.

Choose Length:

18"
36 + $3.00 36 +$3.00
42 + $5.00 42 +$5.00

Choose Finish:

Satin Stainless
P - Peened + $5.00 P - Peened +$5.00

Overview

The ASI 3701 is a straight horizontal grab bar series built for ADA-compliant commercial restrooms, healthcare facilities, and accessible spaces. It is available in multiple lengths to suit different installations. Finish options are called out by suffix: P for peened, W for white powder coated, and no suffix for the standard satin stainless finish.

The bar is made from 18-gauge Type 304 stainless steel tubing at 1-1/4 inches outside diameter. The mounting flange is 1/8-inch thick stainless steel, continuously heliarc welded to the tubing, with a 3-1/8-inch diameter base and three locking dimples. A 22-gauge snap-on cover fits over the flange to conceal the screw heads after installation. Wall clearance is 1-1/2 inches from face of wall to center of bar.

The bar meets and exceeds 2010 ADA Accessibility Standards and ANSI A117.1 for a minimum 250-lb load capacity. Install height should place the top of the bar between 33 and 36 inches above finished floor. Appropriate backing or anchoring must be in place before installation. ASI offers a compatible anchor series (3900 series) that must be specified separately.

Available Options: Choose Options Above

Product at A Glance

  • Available in multiple lengths and three finish options
  • 18-gauge Type 304 stainless steel, 1-1/4" outside diameter
  • Snap-on flange cover for a clean, screw-free appearance
  • Supports loads in excess of 250 lbs, ADA and ANSI A117.1 compliant
  • Compatible with ASI 3900 series anchors, specified separately
  • 1-year warranty from date of invoice
Length Selected as a separate option
Finish Options No suffix: Satin Stainless / P: Peened / W: White Powder Coat
Construction 18-gauge Type 304 Stainless Steel
Bar Diameter 1-1/4" outside diameter [Ø32 mm]
Wall Clearance 1-1/2" [38 mm]
Load Capacity 250 lbs
ADA Install Height 33" min to 36" max AFF to top of bar
Warranty 1 year from date of invoice

More Info

The 3701 falls under CSI MasterFormat Section 10 28 13 (Toilet Accessories). Wall backing or blocking must be installed before wall finishing to meet local building code and ADA load requirements.

Reviews

Q&A