Qualified Hardware logo Paypal
1-866-749-7661 Contractor Hotline: 1-866-622-0224
Cart icon Order in the next 18 hours 3 minutes to ship tomorrow! *

Electrified Door Closer/Holder For Fire Doors

About this Category

Fire doors that do not serve as an exit or entrance, but are there for fire safety reasons, often require a closer/holder. These doors are there for protection in the case of a fire to block the spread of smoke and flames. They will, therefore, remain open at all times unless they are activated by an alarm system.

Jump to a brand:

Rixson logo LCN logo

Rixson

view Rixson 0600 Smok-Chek V Series - Non-Detectored Closer/Holder - Electrified Door Closer/Holder For Fire Doors

Rixson - 0600 Smok-Chek V Series - Non-Detectored Closer/Holder

Multiple Options and Finishes Multiple Options

Starting at: $547.00

The Rixson 0600 Smok-Chek V Series is a non-detectored electromechanical closer/holder that gets mounted on the pull-side of a door. This Smok-Chek V series is designed to hold open a door until it is activated by an existing fire alarm system which releases the door to close.

  • Usage: Heavy Duty
view Rixson 0601 Smok-Chek V Series - Non-Detectored Closer/Holder Push Side Mount - Electrified Door Closer/Holder For Fire Doors

Rixson - 0601 Smok-Chek V Series - Non-Detectored Closer/Holder Push Side Mount

Multiple Options and Finishes Multiple Options

Starting at: $547.00

The Rixson 0601 Smok-Chek V Series is designed for double egress doors and for doors that are set into a reveal. This closer/holder is non-detectored and gets mounted on the push-side of a door. It is a non-handed product with a hold-open range of 85 - 135 degrees for reveals up to 2-3/4", and 85 - 95 degrees for reveals between 2-3/4" and 3-1/2".

  • Usage: Heavy Duty
view Rixson 4PUSH Smok-Chek VI Series - Non-Detectored Closer/Holder - Electrified Door Closer/Holder For Fire Doors

Rixson - 4PUSH Smok-Chek VI Series - Non-Detectored Closer/Holder

Multiple Options and Finishes Multiple Options

Starting at: $836.00

The Rixson 4PUSH Smok-Chek VI Series is a handed closer/holder whose functions are a combination of the functions of a door closer and a single-point holder. These closer/holders will hold the door open until activated by an alarm system when they release the door to close. It is non-detectored and is therefore used in buildings where a fire alarm system already exists. The 4PUSH is mounted on the push side of doors that are a minimum of 22" wide.

  • Usage: Heavy Duty
view Rixson 4PULL Smok-Chek VI Series - Non-Detectored Closer/Holder - Electrified Door Closer/Holder For Fire Doors

Rixson - 4PULL Smok-Chek VI Series - Non-Detectored Closer/Holder

Multiple Options and Finishes Multiple Options

Starting at: $836.00

The Rixson 4PULL Smok-Chek VI Series is a non-detectored closer/holder that keeps cross-corridor and patient room doors open at all times unless they are activated by a fire alarm system to close the door. Closer/holder mounts on the pull side of doors that have a minimum width of 28". A 2" clearance is necessary above a 2" door frame to fit this closer holder.

  • Usage: Heavy Duty
view Rixson SC-V Holder Smok-Chek V Holder Module - Electrified Door Closer/Holder For Fire Doors

Rixson - SC-V Holder Smok-Chek V Holder Module

Starting at: $469.00

This Rixson SC-V holder is a replacement holder module for Smok-Chek V series closer/holders. Available in 120V AC or 24V AC/DC voltage.

LCN

view LCN 4040SE-AL Sentronic Closer/Holder - Electrified Door Closer/Holder For Fire Doors

LCN - 4040SE-AL Sentronic Closer/Holder

Starting at: $512.00

This LCN 4040SE is a non-sized closer/holder that will provide single point hold-open for fire and smoke barrier doors. This closer interfaces with alarm systems which will keep the door held open until an electric current will release the holding mechanism and cause the door to closer.

  • Usage: Heavy Duty
view LCN 4040SE-3077T Standard Arm for 4040SE - Electrified Door Closer/Holder For Fire Doors

LCN - 4040SE-3077T Standard Arm for 4040SE

Starting at: $89.00

The LCN 4040SE-3077T is the standard non-handed arm, adjustable to select hold-open point.

More About Electrified Door Closer/Holder For Fire Doors

Electrified door closer/holders are electronic devices that combine the functions of a door closer and a single point door holder. These closer/holders are specifically designed for fire doors. They will keep a fire door open at a given point until the closer is activated by a smoke detector system to close the door. In the case of a fire, this will prevent the rapid spreading of smoke throughout a building.

These closers are available as detectored, where they are equipped with a smoke detector system, or as non-detectored which is used in an application where a fire alarm system already exists and can be connected to the device. They also come with various mounting and handing options to suit the needs in a variety of applications.    

Fire doors that remain open are often found in long corridors, where they are just there for fire safety reasons. An electrified closer holder will make it as safe as possible.

7 items Scroll to see more below