Qualified Hardware logo Call to Speak
to an Expert
1-866-749-7661 Contractor Hotline: 1-866-622-0224

 

 

 

dormakaba RTS88-BFI-105-HO

Special Order Barrier Free Overhead Concealed Door Closer Body for Interior Doors

Get a Quote
Special Order non-stock item Requires 6 week lead time

SKU: RTS88-BFI-105-HO

Choose Options Below

Dorma RTS88-BFI barrier free overhead concealed door closer body. Meets ADA requirements of 5lbs of opening force for interior doors. Designed to fit into headers as small as 1-3/4" x 4" for aluminum frames and is also adaptable to wood and hollow metal frames. For single or double acting exterior doors. With 105 degree swing and hold open.

Because this is not a stock item we must order it specifically for you and we will be unable to accept a return unless the item is defective as determined by the factory it was bought from.

  • Special Order
  • FREE Shipping

Have a question about this product?

Start selecting options

Use the menu on the right to select available options.
After all options have been chosen, you can add to cart.

Choose Extended 5MM Spindle:

3/16" (5MM) Integral Extended Spindle
No Extended Spindle

Overview

Special order item with 4 week lead time.
  • Designed to fit into headers as small as 1-3/4" x 4" for aluminum frames and is also adaptable to wood and hollow metal frames.
  • RTS88 BFI with hold open and 105º degree swing.
  • RTS88 BFI will meet barrier-free requirements of 5 lb interior maximum opening force on 3'-0" wide interior center hung single or double-acting doors.
  • Maximum door weight of 200 lb on interior doors.
  • Maximum interior door width up to a 3'.
  • For both single-acting or double-acting doors.

Available Options: Choose Options Above

  • Extended 5MM Spindle:

    • 3/16" (5MM) Integral Extended Spindle
    • No Extended Spindle

More Info

  • Retrofits of Jackson, Rixson 608, and similar style closers.
  • Closer body is non-handed
  • Manual door closers, including closers certified to meet ANSI/BHMA A156.4, when installed and adjusted to conform to ADA or other reduced opening force requirements, may not provide sufficient power to reliably close and latch a door.
  • Mechanical backcheck
  • Always use an auxiliary stop in conjunction with RTS88 installations.
  • Pressure relief valve protects the closer from abuse due to forced closing
  • An integral positive stop limits door swing to 105º.
  • An auxiliary stop should always be installed in conjunction with RTS88.
  • Closing speeds are controlled by two adjustment valves.
  • Sweep area is from 105º to 20º. Latch area is from 20º to 0º.
  • Mounting brackets are included to install closer into aluminum or wood headers

Reviews

Q&A

Scroll for More Product Information