Order in the next 18 hours 44 minutes to ship tomorrow!

Rixson Magnetic Holders

About this Category

Electromagnetic holders are used to hold a door open until it is released by a smoke alarm system or from a remote device. They are often required by fire safety codes in fire rated applications. Browse through our selection of the best electromagnetic holders on the market.

view

Rixson - FM990 Low Profile (Flush) Electromagnetic Holder

Starting at: $329.00

Rixson FM990 electromagnetic holder can be used in most remote door release applications. They are primarily used to hold smoke barrier doors open until released by a remote smoke detector or any other switching device. Holders must be used in conjunction with door closers.

Usage: Standard Duty

view

Rixson Long Armature Wall Mount Electromagnetic Holder Magnetic Holders

Rixson - FM998 Long Armature Wall Mount Electromagnetic Holder

Starting at: $329.00

This Rixson FM998 is a long armature wall mounted electromagnetic holder that has a holding force of twenty-five to forty pounds and a total projection of 3-5/8". This product is generally used to keep smoke barrier doors open unless they are released by a connected smoke alarm system or any other other remote switching device.

Usage: Standard Duty

view

Rixson Short Armature Wall Mount Electromagnetic Holder Magnetic Holders

Rixson - FM997 Short Armature Wall Mount Electromagnetic Holder

Starting at: $329.00

This FM997 is a short armature electromagnetic holder that gets mounted on the wall and has a total projection of 2-5/8". The wiring is concealed. Tri volt: 120VAC, 24VAC/DC and 12VDC. Mounting requires a 2" by 4" by 1-3/4" outlet box that is properly fastened.

Usage: Standard Duty

view

Rixson Surface Electromagnetic Holder Magnetic Holders

Rixson - FM996 Surface Electromagnetic Holder

Starting at: $349.00

This Rixson FM996 is an electromagnetic holder that has surface mounted wiring and requires 1-1/2" deep housing for the adapter and a well reinforced wall. This holder has a holding force of twenty-five to forty pounds and a total projection of four and an eighth inches.

Usage: Standard Duty

view

Rixson Heavy Duty Wall Mount Electromagnetic Holder Magnetic Holders

Rixson - FM993 Heavy Duty Wall Mount Electromagnetic Holder

Starting at: $642.00

This Rixson FM993 is a heavy-duty electromagnetic holder which has a holding force of three hundred pounds and gets mounted on a wall. Its voltage is 24VDC only and its wiring can be surface mounted or concealed. Fail safe operation will release door to close in the event of power loss.

Usage: Heavy Duty

view

Rixson - FM980 Floor Mounted Low Profile Electromagnetic Holder

Starting at: $585.00

This Rixson FM980 is a floor mounted low profile electromagnetic door holder. It has twenty-five to forty pounds of holding force and covers 6-5/8" of floor space. Its wiring is concealed and it has tri-voltage of 120VAC, 24VAC/DC and 12VDC.

Usage: Standard Duty

view

Rixson 1/2 Armature Extension* Magnetic Holders

Rixson - 900-50 1/2" Armature Extension*

Starting at: $52.00

This Rixson 900-50 is a 1/2 inch armature extension which will increase the distance between the armature face and the door face. Required the 900 Armature Base unit for use.

view

Rixson 3/4 Armature Extension* Magnetic Holders

Rixson - 900-75 3/4" Armature Extension*

Starting at: $52.00

This Rixson 900-75 3/4" armature extension increases the distance between the face of the armature and the face of the door. Must be used in conjunction with the 900 armature base unit.

view

Rixson 1 Armature Extension* Magnetic Holders

Rixson - 900-100 1" Armature Extension*

Starting at: $52.00

The Rixson 900-100 1" armature extension will increase the distance between the armature face and the door face. Requires the 900 Armature Base unit for use.

view

Rixson 90 Degree Bend Armature Extension Magnetic Holders

Rixson - 900Z 90 Degree Bend Armature Extension

Starting at: $98.00

This Rixson 900-Z is a swivelling armature extension that measures 1-1/2" and allows contact to move up to ninety degrees. This extension increases the distance between the door face and the armature face. Must be used with the 900 armature unit base.

view

Rixson 2 Armature Extension* Magnetic Holders

Rixson - 900-200 2" Armature Extension*

Starting at: $64.00

The Rixson 900-200 2" armature extension will increase the distance between the armature face and the door face. Requires the 900 Armature Base unit for use.

view

Rixson Armature Extension Base Unit Magnetic Holders

Rixson - 900 Armature Extension Base Unit

Starting at: $98.00

This Rixson 900 1-1/2" extension base unit will increase the distance between the armature face and the face of the door. Extension pieces must be used in conjunction with this 900 armature base unit. Allows contact to move 90 degrees offset.

view

Rixson Replacement Cover Magnetic Holders Magnetic Holders

Rixson - 998315 Replacement Cover Magnetic Holders

Starting at: $91.00

The Rixson 998315 is a replacement cover for FM997, FM998 & FM996 Magnetic holders.

view

Rixson Armature Assembly Magnetic Holders

Rixson - 997510 Armature Assembly

Starting at: $165.00

This Rixson 997510 is a replacement door armature for the FM980, FM981, FM990, FM991,FM996 and FM997 magnetic holders.

view

Rixson - 998512-689 Armature Assembly

Starting at: $165.00

This Rixson 998512-689 is a replacement door armature for the FM998 and 999 magnetic holders.

view

Rixson Magnet Assembly and Bracket Magnetic Holders

Rixson - 998369-3V Magnet Assembly and Bracket

Starting at: $207.00

This is a replacement multi-voltage magnet assembly with it's mounting bracket. As a replacment electrical item, it cannot be returned.

Series: 998

view

Rixson Replacement Magnet for Smok-Chek V Magnetic Holders

Rixson - 930106 Replacement Magnet for Smok-Chek V

Starting at: $158.00

Replacement magnet for Rixson's Smok-Chek V Electrified Closer/Holder. Because this is an electrified replacement part, it cannot be returned.

view

Rixson - 930105 Replacement Magnet for Smok-Chek V

Starting at: $158.00

Replacement magnet for Rixson's Smok-Chek V Electrified Closer/Holder.

More About Rixson

RIXSON Specialty Door Controls offers customized solutions for the most challenging design requirements. It is the leading North American provider of concealed closers, pivots and mechanical/electromechanical door holders. QualifiedHardware.com maintains one of the largest Rixson inventories in the country.

In 1900, Oscar Rixson, a Finnish architect, started a manufacturing company in Chicago, Illinois. His first products were surface door closers, along with window & sash hardware. As time went on, Rixson and his engineers developed products that were concealed so that the beauty of buildings equipped with Rixson products would shine through. The late 1960's was a period of growth for the Rixson family business, with the acquisition of a company that manufactured door holding devices. This line of products has evolved into the Checkmate line of today. In the mid-seventies, the RIXSON company purchased another innovative business, Firemark, to meet the requirements of new standards for fire and life-safety. RIXSON's Smok-Chek series was the first closer/holder combination product in the hardware industry.

Our inventory includes Rixson concealed floor closers, overhead closers, Smok-Cheks, pivots & pivot sets, gate closers, overhead stops, magnetic holders and specialty floor closers for shallow floor conditions. With an extensive inventory of floor closer bodies, cement cases, cover plates, arms, tools, kits and all of the necessary parts and accessories to make new installations or renovations and repairs simple - QualifiedHardware.com is the place to go when you need a Rixson product.

18 items Scroll to see more below