Qualified Hardware logo Call to Speak
to an Expert
1-866-749-7661 Contractor Hotline: 1-866-622-0224

 

Sargent 1431-PH10

Special Order Door Closer with Heavy Duty Hold Open Parallel Arm

Get a Quote
Special Order non-stock item Requires 6 week lead time

SKU: 1431-PH10

Choose Options Below

The Sargent 1431 series Powerglide door closers with aluminum body are for heavy duty commercial or industrial use. For interior and exterior doors. With adjustable spring size to fit any application

Because this is not a stock item we must order it specifically for you and we will be unable to accept a return unless the item is defective as determined by the factory it was bought from.

  • Special Order
  • FREE Shipping

Have a question about this product?

Start selecting options

Use the menu on the right to select available options.
After all options have been chosen, you can add to cart.

Choose Handing:

left HAND SHOWN Left Hand (LH)
RIGHT HAND SHOWN Right Hand (RH)

Help Me Decide

 

Face the outside of the door to determine the hand. Here are some rules to follow:

  • The outside of an exterior door is the street or entrance side.
  • The outside of a room door is the hall side.
  • The outside of a single communicating door is the side from which the hinges are not visible when the door is closed.
  • The outside of a closet door is the room or hall side.

 

The door is Left Handed if:

   • While you are standing outside of the room facing the door, the hinges are on your left side.

The door is Right Handed if:

   • While you are standing outside of the room facing the door, the hinges are on your right side.

Choose Finish:

Aluminum Enamel (EN) Aluminum Enamel (EN)
Dark Bronze Enamel (EB) Dark Bronze Enamel (EB)

Overview

Special order item with 4 week lead time.

  • Adjustable spring size1-6 set at size 3
  • With PH10- heavy duty friction hold open parallel arm.
  • Adjustable hold open from 75° to 180°
  • Forged steel arm 11-1/4" long
  • Handed same as door
  • Separate latching, sweep and back check intensity valves
  • Use friction hold open arms for doors subject to moderate hold open use

Available Options: Choose Options Above

  • Handing: info icon

    • Left Hand (LH)
    • Right Hand (RH)
  • Finish:

More Info

  • Mounting holes are spaced 1" horizontally and 11-1/8" vertically
  • Barrier Free, meets ADA requirements (Opening force 5 lb or less on interior doors, 8.5 lb or less on exterior doors)
  • Heavy duty one piece aluminum silicon alloy body
  • All weather fluid
  • High impact non-corrosive plastic cover standard
  • Meets and exceeds ANSI/BHMA A156.4 Grade 1 requirements
  • Standard pressure relief valve for Backcheck
  • Dimensions with cover-12" L x 3-3/8" H
  • Projection of closer, 2-1/4" with standard cover.
    Available as a special order in other finishes and with Delayed Action. Contact us directly to arrange your special order.

Reviews

Q&A

Scroll for More Product Information