We are also focused on the welfare of our staff and are following the guidelines of local & national authorities.
 
Our delivery partners are maintaining service with exceptions governed by local conditions. Note however, that some expedited service guarantees such as overnight and two day delivery are suspended at this time.

Please don't hesitate to call 866-749-7661 or email info@qualifiedhardware.com if you need anything.
Stay safe!

 

Sargent 8913F-ETL-32D

Special Order Mortise Lock Exit Device with Keyed Lever

Call for Pricing 1-866-749-7661
Special Order non-stock item Requires 4 week lead time

SKU: 8913F-ETL-32D

Choose Options Below

Sargent 8913 Mortise lock exit device with keyed lever. Designed for standard width stile applications on wood and metal 1-3/4" thick doors. 4-1/2" minimum stile.

Because this is not a stock item we must order it specifically for you and we will be unable to accept a return unless the item is defective as determined by the factory it was bought from.

  • Special Order
  • FREE Shipping

Have a question about this product?

Call for Pricing 1-866-749-7661

Start selecting options

Use the menu on the right to select available options.
After all options have been chosen, you can add to cart.

Choose Handing:

Left Hand Reverse - LHR
Right Hand Reverse - RHR

Help Me Decide

Face the outside of the door to determine the hand. Here are some rules to follow:

  • The outside of an exterior door is the street or entrance side.
  • The outside of a room door is the hall side.
  • The outside of a single communicating door is the side from which the hinges are not visible when the door is closed.
  • The outside of a closet door is the room or hall side.

​Doors equipped with exit devices swing out only, and therefore exit device handing is known as reverse bevel.

The door is Left Hand Reversed if:

   • While you are standing outside of the room facing the door, the hinges are on your left side.

The door is Right Hand Reversed if:

   • While you are standing outside of the room facing the door, the hinges are on your right side.

Overview

Special order non stock item with 4 week lead time
  • Designed for standard width stile applications on wood and metal doors
  • For 1-3/4" thick doors
  • Keyed lever (ETL) - key outside locks/unlocks lever. Mortise cylinder included.
  • F Rail for 33" to 36" door widths.
  • Finish-US32D satin stainless steel.
  • 4-1/2" minimum stile
  • Latch Bolt-brass nickel plated, 3/4" throw, anti-friction
  • Dead Latch-brass, sliding type
  • Hex key dogging standard.
  • Device can be cut to size in the field.
  • Handed: Specify RHR or LHR

Available Options: Choose Options Above

  • Handing: info icon

    • Left Hand Reverse - LHR
    • Right Hand Reverse - RHR

More Info

  • Supplied standard with wood and machine screws
  • Devices are ANSI A156.3 2001 Grade 1
  • Available as UL Fire Rated Exit device
  • Concealed single point guarded latching for additional security
  • Strike - C908 standard black nylon coated
  • Center Case Dimensions 8-3/8" x 2-5/8"
  • Device Centerline from Finished Floor 41"
  • Projection Pushbar Neutral - 3" Pushbar Depressed - 2-1/8"
     

Reviews

Q&A

Scroll for More Product Information