Order in the next 20 hours 27 minutes to ship tomorrow!

Rixson Overhead Holders

About this Category

Protect your door and frame from abuse caused by everyday use with an overhead holder/stop. It won’t be in your way or affect the aesthetics of your room. Browse through our selection to find the perfect one for your application.

view

Rixson Heavy Duty Concealed Mount Holder/Stop Overhead Holders

Rixson - 1-Series Heavy Duty Concealed Mount Holder/Stop

Multiple Options and Finishes

Starting at: $290.00

This Rixson 1-Series heavy-duty, concealed mount, holder/stop is recommended for exterior and interior doors that have a high traffic rate and/or are heavily abused. These overhead holders are used to protect door assemblies by cutting down the wear and tear of frequent use, protecting closing mechanisms from wind gusts, abuse and vandalism.

Series: 1 series
Usage: Heavy Duty

view

Rixson Adjustable Standard Duty Concealed Holder/Stop Overhead Holders

Rixson - 2-Series Adjustable Standard Duty Concealed Holder/Stop

Starting at: $141.00

This Rixson 2-Series is an adjustable standard duty concealed holder/stop designed for exterior and interior doors that have moderate door traffic and medium weight. These holders are great for reducing the wear and tear of your doors. The door opening degrees on the 2-series can be adjusted to suit the current needs of the doorway.

Series: 2
Usage: Standard Duty

view

Rixson - 6-336 Concealed Mount Low profile Stop for Aluminum Storefront Doors

Starting at: $391.00

This Rixson 6-336 is a concealed mount, low profile stop used in aluminum door webbing on storefront doors. This model is for doors that are hung with 3/4" offset-hung pivots or butt hinges that measure between 33-1/16" - 38" wide. Should be used on doors that are of medium weight and moderate traffic.

Series: 6 Series

view

Rixson - 6-436 Concealed Mount Low profile Stop for Aluminum Storefront Doors

Starting at: $391.00

The Rixson 6 series of standard duty concealed mount overhead stops and holders is designed for installation in aluminum door webbing. Overhead stops and holders are used to protect door assemblies. They cut down the wear and tear of frequency, closing mechanisms, wind gusts, abuse and vandalism.

Series: 6 Series
Usage: Standard Duty

view

Rixson Heavy Duty Surface Mount Holder/Stop Overhead Holders

Rixson - 9-Series Heavy Duty Surface Mount Holder/Stop

Multiple Options and Finishes

Starting at: $377.00

This Rixson 9-Series heavy duty, surface mount, overhead holder/stops are great to use as protection for your door assemblies against wear and tear. This series is for single acting doors and will allow the door to swing up to 110 degrees.

Series: 9-Series
Usage: Heavy Duty

view

Rixson Standard Duty Surface Mount Holder/Stop Overhead Holders

Rixson - 10-Series Standard Duty Surface Mount Holder/Stop

Multiple Options and Finishes

Starting at: $141.00

This Rixson 10-Series Checkmate, is an overhead holder/ stop family that can be used on medium weight doors with moderate traffic. We offer models with a hold-open or stop for various door sizes hung with offset pivots, butts or center-hung pivots.

Series: 10 Series
Usage: Standard Duty

view

Rixson Electromechanical Hold Open Overhead Holders

Rixson - 99-Series Electromechanical Hold Open

Multiple Options and Finishes

Starting at: $516.00

Rixson's Checkmate 99 series electromagnetic holder is just what is required for doors that need to be held open but already have perfectly good door closers! The 99 Checkmate non-detectored as part of an established building alarm system. The Checkmate 99 can be used with any make or model of door closers (except overhead concealed). Even floor closer installations lend themselves to this product.

Series: 99
Usage: Standard Duty

view

Rixson 10 Series Flush Mounting Angle Jamb Bracket Overhead Holders

Rixson - 5258 10 Series Flush Mounting Angle Jamb Bracket

Starting at: $54.00

This Rixson 5258 angle jamb bracket is used with the 10-series overhead holders/stops that are mounted on the push side of the door.

More About Rixson

RIXSON Specialty Door Controls offers customized solutions for the most challenging design requirements. It is the leading North American provider of concealed closers, pivots and mechanical/electromechanical door holders. QualifiedHardware.com maintains one of the largest Rixson inventories in the country.

In 1900, Oscar Rixson, a Finnish architect, started a manufacturing company in Chicago, Illinois. His first products were surface door closers, along with window & sash hardware. As time went on, Rixson and his engineers developed products that were concealed so that the beauty of buildings equipped with Rixson products would shine through. The late 1960's was a period of growth for the Rixson family business, with the acquisition of a company that manufactured door holding devices. This line of products has evolved into the Checkmate line of today. In the mid-seventies, the RIXSON company purchased another innovative business, Firemark, to meet the requirements of new standards for fire and life-safety. RIXSON's Smok-Chek series was the first closer/holder combination product in the hardware industry.

Our inventory includes Rixson concealed floor closers, overhead closers, Smok-Cheks, pivots & pivot sets, gate closers, overhead stops, magnetic holders and specialty floor closers for shallow floor conditions. With an extensive inventory of floor closer bodies, cement cases, cover plates, arms, tools, kits and all of the necessary parts and accessories to make new installations or renovations and repairs simple - QualifiedHardware.com is the place to go when you need a Rixson product.

8 items Scroll to see more below